FlameThrower Spark Plug Wires 7.0mm Universal Stock Look Black – 6 Cyl Straight Boots
- Made in USA
- Stock Look unprinted black wires concealing the potential within
- Straight park plug and straight distributor plug boots
- Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy. -Secondary path: Carbon impregnated fiberglass center core.
- Low 500 ohm per foot resistance.
- 7mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
- EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
- Fiberglass reinforcing braid for added strength and flexibility.
Now you can get a “stock-look” spark plug wire, that performs! We’ve designed our 7mm wires with the same core we use in our 8mm wire. The only difference is the 7mm flat black silicone jacket that hides its performance potential from the naked eye. Get the best of both worlds with “state-of-the-art performance and a stock look”. These wires will fit most original wire looms.
Universal 7mm spark plug wire kits allow you to build spark plug wires to match your unique engine and wire loom configuration. Universal kits are available with 90° or straight spark plug boot ends. Check out our spark plug wire crimp tool and wire stripping tool for the best termination possible.
Wire Lengths:
- Coil Wire – 81.21 cm (32 inch)
- Wire 1 – 132.08 cm (52 inch)
- Wire 2 – 121.92 cm (48 inch)
- Wire 3 – 101.6 cm (40 inch)
- Wire 4 – 101.6 cm (40 inch)
- Wire 5 – 81.28 cm (32 inch)
- Wire 6 – 81.28 cm (32 inch)
Proper termination with the correct tools is essential to getting the most our of your spark plug wires.
