Are Certified to Australian Standard 2906:2001 and the 20L Metal Jerry cans have also passed stringent Defence Force testing (BAM).
Have Patented Secondary Locking Pin closures.
Manufactured with a quality Bayonet closure.
Pressure tested up to 415KPA this ensures the can is leak proof in any position.
Contains a unique 12mm square breather pipe with wide mouth opening in the spout to ensure smoother pouring of fuel.
Meet UN Approval and TUV Standards, and our colours are AFAC Certified.
Range of Accessories including Holders, Pourers, Seals and ID Tags, and Flexible Metal Pourers.
Can be stored in any orientation without leaking
Replaceable seal for longer service life
Recommendations:
Service life 20 years
Metal Fuel Can Range
Editorial In AAAA Magazine
July 2014
|
How to Open a Tight
Fuel Can Lid
|
How to Fix a
Metal Fuel Can
|
Metal Fuel Can
Range 2016
|
Fuel Can Opening/Sealing
Instructions
|
|
Safe Refueling tips from Worksafe Victoria
When refueling petrol or diesel powered portable equipment there must be safe systems of work in place to reduce the ignition risk.
These may include:
When Refueling:
- Turn the equipment off and give it time for the hot parts to cool down
- Remove the equipment from inside vehicles
- Remove the equipment from trailers or surfaces (eg plastic or rubber) to ground out any static charge built up on the equipment
- Refuel away from other heat and possible ignition sources
- Refuel in a well-ventilated area
- Do not refuel in low lying areas, where vapours can accumulate
- Refuel only from approved labelled fuel containers
- Use a funnel, to reduce the risk of static electricity and fuel spillage
- Ensure suitable fire extinguishers are readily accessible
- Replace fuel caps on equipment and fuel containers tightly.
For more information from Worksafe Victoria, visit their site.
When Transporting portable equipment and fuel containers:
- Allow the equipment to cool down before loading it onto a vehicle
- Ensure fuel caps are on tight
- Secure in the upright position in a well-ventilated space.
When Storing fuel onsite:
- Only approved labelled fuel containers are used
- Fuel containers are outside vehicles or structures, in a well-ventilated area.
The AFAC Colour Coded range of Pro Quip Metal Jerry Cans are not always stocked on the shelf in retail stores as they are considered a specialised item.
The below outlets will be able to order them specially upon request from us.
