FlameThrower Spark Plug Wires 7.0mm Universal Stock Look Black – 6 Cyl 90 Deg

FlameThrower Spark Plug Wires 7.0mm Universal Stock Look Black – 6 Cyl 90 Deg

Universal Wire sets allows you to cut the exact length of wire you need for each cylinder, making for a tidy and efficient Ignition.

Product Contains:
6 x 7.00mm Spark Plug Wires with 90 Degree Plugs on spark plug end, unterminated on cap end
1 x 7.00mm Coil Wire unterminated both ends
8 x Terminals and straight cap end boots
Fitting Instructions

$160.00

Availability: In stock

Pertronix

FlameThrower Spark Plug Wires 7.0mm Universal Stock Look Black – 6 Cyl 90 Deg

Now you can get a “stock-look” spark plug wire, that performs! We’ve designed our 7mm wires with the same core we use in our 8mm wire. The only difference is the 7mm flat black silicone jacket that hides its performance potential from the naked eye. Get the best of both worlds with “state-of-the-art performance and a stock look”. These wires will fit most original wire looms.

  • Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy. -Secondary path: Carbon impregnated fiberglass center core.
  • Low 500 ohm per foot resistance.
  • 7mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
  • EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
  • Fiberglass reinforcing braid for added strength and flexibility.

Wire Lengths:

  • Coil Wire – 81.21 cm (32 inch)
  • Wire 1 – 132.08 cm (52 inch)
  • Wire 2 – 121.92 cm (48 inch)
  • Wire 3 – 101.6 cm (40 inch)
  • Wire 4 – 101.6 cm (40 inch)
  • Wire 5 – 81.28 cm (32 inch)
  • Wire 6 – 81.28 cm (32 inch)

Proper termination with the correct tools is essential to getting the most our of your spark plug wires.

Weight .7 kg
Dimensions 31 × 21 × 7 cm
=
Shopping Cart
Scroll to Top