5L Safe-T-Pour Fuel Can

The Pro Quip 5L Safe-T-Pour Plastic Fuel Can includes Patented Fill-n-Stop pourer which elimintaes risk of fire flashback
High visibility orange colour
Clear View Line with increment markings on back 5L Capacity
Australian Made from HDPE, AS2906:2001 Approved
Suitable for all pump fuels

The Safe-T-Pour Fuel Can from Pro Quip is an innovation in Fuel handling.

 NO SPILLS
NO OVERFILLS
NO FIRE FLASHBACKS

Patented Easy-Fill Flexible Pourer prevents overflow

When fuel reaches tip of pourer, flow stops

Patented Pourer prevents fire flashbacks

Fuel vapour inside can is unable to ignite

Easy Fuel Gauge viewing window

Suitable for Unleaded, Diesel and 2-Stroke

Certified to Australian Standard AS2906:2001

No funnel required

Unit Weight: 520g

Pro Quip Plastic Fuel containers are Australian Made,
and use replaceable spare parts.

  • All fuel cans in the Pro Quip range are Certified to Australian Standard AS2906:2001. The distinctive colouring of the cans is to reduce the possibility of using incorrect fuels.
  • The space saving design of the plastic fuel can fits standard RV racks. The embossed pattern provides a slip resistant surface.
  • Pro Quip Plastic Fuel containers are Australian Made, and use interchangeable spare parts which are available in retail display packaging.
  • Pro Quip Fuel cans come with an internally stored pourer that will not get contaminated with dust etc. and pours freely without “glugging”, using the breather on the rear of the can.

Fill-n-Stop pourer eliminates risk of fire flashabck and acts as a stop flow device
Ideal for storage of up to 5L of Fuel
4.2KG weight when filled to nominal capacity with unleaded fuel
Square space-saving shape
Replacement parts available

Recommendations:
To be stored upright in a Pro Quip Can Caddy during transport
Service life 5 years

INDIVIDUAL DIMENSIONS (CM)

19 x 14 x 29cm

SIZE (L)

5

Fuel Type

Colour

Weight (kg)

Box Qty

BOX DIMENSIONS (CM)

59 x 59 x 30cm

Tips for Safe-T-Pour Fuel Can

  1. When using your Safe-T-Pour Fuel Can, make sure you place the tip of the pourer a couple of centimetres BELOW where you want the fuel level to stop. This will ensure you will get the fuel level you want!
  2. To make it easier to use the can correctly, use the flexible pourer by bending it into the fuel tank opening, then tilt your can to start the fuel flow. When you’re done, tilt the can down so it’s level, then remove and straighten the pourer!

Safe Refueling tips from Worksafe Victoria

When refueling petrol or diesel powered portable equipment there must be safe systems of work in place to reduce the ignition risk.
These may include:

When Refueling:

  • Turn the equipment off and give it time for the hot parts to cool down
  • Remove the equipment from inside vehicles
  • Remove the equipment from trailers or surfaces (eg plastic or rubber) to ground out any static charge built up on the equipment
  • Refuel away from other heat and possible ignition sources
  • Refuel in a well-ventilated area
  • Do not refuel in low lying areas, where vapours can accumulate
  • Refuel only from approved labelled fuel containers
  • Use a funnel, to reduce the risk of static electricity and fuel spillage
  • Ensure suitable fire extinguishers are readily accessible
  • Replace fuel caps on equipment and fuel containers tightly.

For more information from Worksafe Victoria, visit their site.

When Transporting portable equipment and fuel containers:

  • Allow the equipment to cool down before loading it onto a vehicle
  • Ensure fuel caps are on tight
  • Secure in the upright position in a well-ventilated space.

When Storing fuel onsite:

  • Only approved labelled fuel containers are used
  • Fuel containers are outside vehicles or structures, in a well-ventilated area.

 

=

You may also like…

Scroll to Top