Posi-Tap 20-22 AWG

SKU: 604 - 6 PACK Category:

Posi-Tap 20-22 AWG
6 Pack of Red/Grey Posi-Tap Wire Connectors

Suitable for 20-22 gauge wire (up to 2mm Wire).

Connects 1 x 20 or 1 x 22 awg Accessory Leads
Note: The lower the AWG (eg. 8awg), the thicker the wire. The higher the AWG (eg. 26awg), the thinner the wire.

  • Max Tap OD: (2mm) 20 gauge
  • Max Accessory OD: (2mm)

 

How it works:

The body of a Posi-Tap has a metal core through the middle of the casing, which makes a connection when wire strands are attached to the core by the screw-on end pieces:

1. Slip the wire into the ‘U’ shape cut out of the end barrel
2. Screw the end barrel to the body of the tap to centre the connection
3. Insert the second wire through the cap at the other end of the body and tighten. Connection made!

Our range of crimp-free connectors allow you to connect, tap and splice without the use of crimping or hand tools for assembly.
All are reusable, vibration proof and incredibly versatile.
The only tooling you require is that with which to strip the wires that are to be connected together.
This is a great product to test new electrical systems when fitting new electrical gear to your motorbike, car, trailer, caravan or boat.

  • Does Not Cut Wire
  • Reusable
  • No Crimping
  • Multi-Wire capable
  • Strong
  • High Temperature Resistance
  • Vibration Proof
  • OEM Specified

These connectors meet or exceed:

  • SAEJ1211 Section 3.2.3 Salt Spray Test
  • Section 3.2.4 Immersion & Splash Test
  • Section 3.2.5 Dust, Sand & Gravel Test
  • Section 3.2.7 Mechanical Vibration
  • Section 3.2.8 Mechanical Shock
  • Section 3.2.1 Temperature Test

AWG

Area mm²

Australian Industry Equivalent

26 0.13 1mm
24 0.20 1mm
22 0.33 2mm
20 0.52 2mm
18 0.82 2.5mm
16 1.31 3mm
14 2.08 4mm
12 3.31 5mm
10 5.26 6mm
8 8.36 6mm

Bulk Posi-Tap Line Tap Connectors

The Posi-Tap connector enables positive inline tapping of power cables without cutting any strand wires in the host cable. Up to 4 leads at once can be connected to the one Posi-Tap. The ease of use enables power to be tapped in hard to reach out of the way cables without the necessity of cutting, soldering or terminating the cables.

Wire Connectors that are quick, reliable, and reusable.

Posi‑Lock, Posi‑Tap, Posi‑Twist, Posi‑Tite, Posi‑Seal, Posi‑Fuse

Posi-Lock™ is a no-crimp connector system that will not pull apart and is four times stronger than a crimp connector. They are re-useable, resistant to high temperatures and chemicals, and no tools are required. Automotive OE and Aftermarket fitting services are now recognising the benefits to be gained from using the Posi-Lock fully insulated stranded wire connector solutions, with a minimum of fuss and time loss. The Posi-Lock™ connectors meet or exceed SAEJ1211.

Pro Quip Posi-Products Brochure

Available from our ebay store or contact Pro Quip directly

=
Scroll to Top