Micfil Diesel Filter AL150

SKU: 3150 Category:

Micfil Diesel Filter AL150

Micfil Ultra Fine Filters are suited for the filtration of engine oil, gearbox oil, and hydraulic oil, as well as for fuel.

With engine and gearbox oil, the filter is placed in a bypass. For fuel it is in the main stream, and for hydraulic oil it is in the return.

The units can be installed in all engines and all machinery, either as main filters or as after-market filters.

Micfil

The patented Micfil Ultra Fine Filter insert consists of a tear-resistant fibre mesh, with woven-in cellulose fibres of the highest quality.

The filtration performance is down to 0.5µm (microns).

The Micfil Ultra Fine Filter inserts possess a very high contamination absorption capacity, long life span, lower differential pressure and are water absorbent, will reduce frictional wear, lengthen machinery life spans, and lower maintenance costs and possesses approximately 20 times higher filtration performance than a standard filter.

By filtering out Dirt, combustion, oxidation, and abrasion particles of up to approximately 0.5 μm in size from the oil, this helps to minimize abrasion.

Most Standard Filters allow particles smaller than 10 microns to remain in the fluid, leaving the fluid contaminated.

Specification Table for Micfil Models

* 20 bar Filters available on request
(1) The patented Micfil Ultra Fine Filter element consists of a tear-resistant fibre mesh with woven-in cellulose fibres. The filtration performance is down to 0.5 microns. The element possesses a very high contamination absorption capacity, long life span, lower differential pressure and is water absorbent.
(2) Two or more Micfil filters can be installed in line to increase flow/tank capacity.
ie. Fuel flow rates from 350 L/h to 15,000 L/h are available.

Micfil Brochure Flyer

Micfil Specifications Table Flyer

Available exclusively from:

=
Scroll to Top