Posi-Lock 12-18 AWG Fuse Holder & Wire Connectors – 3 PACK

SKU: 619 Category:

Posi-Lock 12-18 AWG Fuse Holder & Wire Connectors

3 Pack of Posi-Lock Round Fuse Wire Connectors

10 PACK – PART NO. FR1218-10 | 100 PACK – PART NO. FR1218

Suitable for 12, 14, 16 or 18 gauge wire (2.5mm up to 6mm Wire)

Suitable for Fuses: Round, Glass 3/4″ to 1-1/4″

Posi-Fuse Round Fuse holder is a patented design which incorporates a universal fit for full coverage of fuses and wire gauges. Wires connect directly to the fuse holder.

Note: The lower the AWG (eg. 8awg), the thicker the wire. The higher the AWG (eg. 26awg), the thinner the wire.

  • Max Wire OD: (6mm) 12 gauge

$9.99

Posi_FusePosi_Lock

How it works:

The body of a Posi-Lock has a metal core through the middle of the casing, which makes a connection when wire strands are attached to the core by the screw-on end pieces. The Fuse Holder version allows for a fuse to be placed inside the center, with tin-plated Brass contacts:

1. Strip the wires you wish to connect around 1cm
2. Insert the first wire through the cap at one end of the body and tighten
3. Insert the second wire through the cap at the other end of the body and tighten.
4. Insert Fuse into slot. Connection made!

Our range of crimp-free connectors allow you to connect, tap and splice without the use of crimping or hand tools for assembly.
All are reusable, vibration proof and incredibly versatile.
The only tooling you require is that with which to strip the wires that are to be connected together.
This is a great product to test new electrical systems when fitting new electrical gear to your motorbike, car, trailer, caravan or boat.

  • Does Not Cut Wire
  • Reusable
  • No Crimping
  • Multi-Wire capable
  • Strong
  • High Temperature Resistance
  • Vibration Proof
  • OEM Specified

These connectors meet or exceed:

  • SAEJ1211 Section 3.2.3 Salt Spray Test
  • Section 3.2.4 Immersion & Splash Test
  • Section 3.2.5 Dust, Sand & Gravel Test
  • Section 3.2.7 Mechanical Vibration
  • Section 3.2.8 Mechanical Shock
  • Section 3.2.1 Temperature Test

AWG

Area mm²

Australian Industry Equivalent

26 0.13 1mm
24 0.20 1mm
22 0.33 2mm
20 0.52 2mm
18 0.82 2.5mm
16 1.31 3mm
14 2.08 4mm
12 3.31 5mm
10 5.26 6mm
8 8.36 6mm
Weight .1 kg
Dimensions 6 × 6 × 1 cm

Bulk Posi-Lock Fuse Holders

Posi-Fuse allows you to wire reusable fuseholders using no crimping or tools. They are vibration proof, high temperature-resistant and can take multi-wires for round or blade fuses.

Wire Connectors that are quick, reliable, and reusable.

Posi‑Lock, Posi‑Tap, Posi‑Twist, Posi‑Tite, Posi‑Seal, Posi‑Fuse

Posi-Lockâ„¢ is a no-crimp connector system that will not pull apart and is four times stronger than a crimp connector. They are re-useable, resistant to high temperatures and chemicals, and no tools are required. Automotive OE and Aftermarket fitting services are now recognising the benefits to be gained from using the Posi-Lock fully insulated stranded wire connector solutions, with a minimum of fuss and time loss. The Posi-Lockâ„¢ connectors meet or exceed SAEJ1211.

posi-lock-diagram

Pro Quip Posi-Products Brochure

Posi-Lock_Brochures

Available from our ebay store or contact Pro Quip directly

ebay
=
Shopping Cart
Scroll to Top