Marine wire Connector Kit 10-18 AWG

SKU: WK0812-10 Category:

Marine wire Connector Kit 10-18 AWG
10 Piece Posi-Lock Weathertite Wire Connectors

Suitable for 8 gauge to 18 gauge wire (2.5mm up to 7mm Wire)

Includes Weathertite Boots for splash-proof wire connections.

Note: The lower the AWG (eg. 10awg), the thicker the wire. The higher the AWG (eg. 26awg), the thinner the wire.

Pack Includes:

  • 3  x  12-18 awg Posi-Locks
  • 3  x  Splash-proof Rubber Boots to fit 12-18 awg Posi-Locks
  • 2  x  10 awg Posi-Locks
  • 2  x  Splash-proof Rubber Boots to fit max 10 awg Posi-Locks

Includes Snap-Lock carry case. Keep all your Posi-Product’s together, with room to throw in some spare wire.




How it works:

The body of a Posi-Lock has a metal core through the middle of the casing, which makes a connection when wire strands are attached to the core by the screw-on end pieces. The Watertite Posi-Lock also has an inner wire guide and insulation, which inserts into the central seal, leaving you with a completely Waterproof connection!

1. Strip the wires you wish to connect around 1cm
2. Thread the wire through the hollow end, and twist to insert into the wire guide
3. Hand tighten the outer cap to the inner seal.
4. Repeat steps for the other wire to have a nice tight, instant wire connection.

Our range of crimp-free connectors allow you to connect, tap and splice without the use of crimping or hand tools for assembly.
All are reusable, vibration proof and incredibly versatile.
The only tooling you require is that with which to strip the wires that are to be connected together.
This is a great product to test new electrical systems when fitting new electrical gear to your motorbike, car, trailer, caravan or boat.

  • Does Not Cut Wire
  • Reusable
  • No Crimping
  • Multi-Wire capable
  • Strong
  • High Temperature Resistance
  • Vibration Proof
  • OEM Specified

These connectors meet or exceed:

  • SAEJ1211 Section 3.2.3 Salt Spray Test
  • Section 3.2.4 Immersion & Splash Test
  • Section 3.2.5 Dust, Sand & Gravel Test
  • Section 3.2.7 Mechanical Vibration
  • Section 3.2.8 Mechanical Shock
  • Section 3.2.1 Temperature Test


Area mm²

Australian Industry Equivalent

26 0.13 1mm
24 0.20 1mm
22 0.33 2mm
20 0.52 2mm
18 0.82 2.5mm
16 1.31 3mm
14 2.08 4mm
12 3.31 5mm
10 5.26 6mm
8 8.36 6mm

Bulk Posi-Tite Watertite Connectors

The Posi-Tite is the world’s first no crimp, reusable, watertite connector and exceeds the very stringent SAE/USCAR-2 5.6.5 submersion test. They are fully submersible in water for extended periods of time!

Wire Connectors that are quick, reliable, and reusable.

Posi‑Lock, Posi‑Tap, Posi‑Twist, Posi‑Tite, Posi‑Seal, Posi‑Fuse

Posi-Lock™ is a no-crimp connector system that will not pull apart and is four times stronger than a crimp connector. They are re-useable, resistant to high temperatures and chemicals, and no tools are required. Automotive OE and Aftermarket fitting services are now recognising the benefits to be gained from using the Posi-Lock fully insulated stranded wire connector solutions, with a minimum of fuss and time loss. The Posi-Lock™ connectors meet or exceed SAEJ1211.


Pro Quip Posi-Products Brochure


Available from our ebay store or contact Pro Quip directly

Scroll to Top