12V Flasher Universal 3 Pin Application Relay Pro Quip Flasher Relays
Pro Quip provide an entire range of Universal Electro–mechanical and Electronic Flasher Relays, which meet or exceed all ADR’s, FMVSS and SAE requirements.
Pro Quip electronic flasher relays are controlled by an integrated circuit and are not affected by voltage, load and environmental variations.
Automatic load sensing is incorporated, allowing the units to operate at a consistent flash rate with varying numbers of lamps in the circuit. An accelerated flash rate provides a warning that a bulb has failed.
All Pro Quip flasher relays are individually tested to specification during manufacture. The relays are endurance tested to more than two million cycles. They also meet or exceed all applicable SAE, FMVSS and ADR13 requirements.
Pin No. |
Description |
| X | Turn signal flasher input |
| L | Turn-signal lamps, left |
| P | Pilot lamp |
| 31 | Battery negative terminal, or ground, direct |
| 49 | Turn signal flasher input |
| 49a | Turn signal flasher output |
Stock Code |
Description |
Type |
Load Sensitive |
Rated Voltage |
MAX. No of Lamps |
Load Rating |
NO. Of Pins |
| 6662B | P1230 (C) | SUPER ELECTRONIC | YES | 12V | 6 | 4 x 21W + 2 x 5W |
3 |
Pro Quip Flasher
|
Pro Quip Complete
|
 |
 |
Have a question on our 12V Flasher Universal 3 Pin Application Relay? head over to our FAQ page.
Follow our socials to receive up to date information on new products, and specials.
